Joined in 2023 
82 
63 About this deal
146mm straight tube
12774657 Registered - Address: 6 Costly Street, Ivybridge, Devon, PL21 0DB - VAT Number: GB212359434 Ideal for service of machinery where moving parts require lubrication. • Used to lubricate hammer mechanisms in impact wrenches. 120cc Mini Grease Gun & Oil Can Set is manufactured from zinc alloy and A3 steel and features a spring primed air piston. 4mm to ensure precise placement of lube. Complete with a 3oz (85g) grease cartridge, nozzles, tubes and high pressure oil can.
High pressure oil can with flexi nozzle
- Capacity: 120g
- Features a spring primed air piston
- 5mm
- Nozzle type: Flat nozzle
- Manufactured from zinc alloy and A3 steel for increased durability
- Spout length: 100mm / Rigid spout length: 146mm
- Barrel diameter: 36.
- Safe working pressure: 2900-4000PSI
- Suitable for use with 90cc / 3oz grease cartridges
- 1/8" NPT Thread
Reviews
Vince
The only precaution when loading the grease is not to leave any gaps as the air bubbles interrupt the supply. It is not necessary to fill the whole cylinder, the dispenser still works well even if it is not full. After a few empty “plungers”, the fat begins to come out.
Cauchy
However, it is also necessary to fill the measuring cap so that screwing it over the cylinder does not create gaps. After screwing the dosing cap, but without tightening, again with a wooden rod I pushed well on the caseback, then tightened the cap. Allows you to lubricate accurately, cleanly. Solid and well made dispenser, paid 12.
Patrizio
Consider that since the nozzle is very small (just over 1/2 millimeter, 6 tenths exactly) the fat thread will be very thin so great for fattening small parts. For the loading I proceeded like this, first with the help of a wooden rod I lifted the case back to the top then as I added the fat, the case back went down. Perfect for greasing any mechanical part without being a pig.
superttm
Very useful! Before I used a syringe but it still flows after pressing while there is no. I saw that someone pushes hard using a screwdriver but not wanting to damage the case back I preferred to use something made of wood. It is fine, well dosable according to the element to be greased.
The back of the package indicates the method of use. Not knowing if the grease in the nozzle so thin can dry out after a long time, I preferred to stick a wire into it (a bristle of a steel brush). Satisfied with my purchase as a car mechanic
Related:
Great Deal 
New Comment