About this deal
The Forstner Bit's 3-sided shank prevents spinning in the chuck. The precision drill bit's short centring tip has two main and one periphery (toothed-edge) cutting edges for spot-on results. Equipped with large chip-free zones, which allow for optimised chip removal, the bit's fast drilling accuracy is further supported. Use when drilling in soft and hard wood, veneered wood and non-laminated chipboard. It is intended for use with all drills (drill drivers, drill stands) with a 10-mm chuck. Welcome to Rowland Tools. 36-1, Jalan Sulaiman 1,Taman Putra Sulaiman, 68000, Ampang, Selangor. It is manufactured to DIN 7483G, cutter hardness is 50 HRC minimum.
Reviews
david balausiak
Ordered the 28mm version and it appears that the diameter is just shy of this at roughly 27. A lot better than some cheaper bits on the market.
Mr. M. Smith
Used it to create a small hole for a tag to be inset into a solid oak frame, as you can see dealt with the solid oak nicely! great bit, used on softwood sleepers, clean cuts most of the time, used on some slightly damp sleepers, cut wasnt as clean but still good.
Peter D.
Sharp, easily fits a pillar drill, or standard drill/driver. Had to drill quite a few posts for 40mm rope. Always handy to have a tool like this - even if I’ll hardly use it.