Creality Official Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis, Modular Design

Reviews

Adam Smith

The printer was delivered within 48 hours and the packaging was very well and thoughtfully designed, to protect the contents in transit. Levelling is simple and stays level for a fair few prints. It took me just under an hour to get it all together, but an experienced 3D printer owner may have it together in less than 20 minutes.

Richard White

Using the supplied PLA filament, 50% fan-speed seemed to work really well for me, and I had no issues with layer adhesion. During assembly, do take care to orient the upright sections correctly – fixing hole at the top, as shown in the supplied assembly guide.

andy osborne

If you’re not sure, go check YouTube – there are some good videos out there on how to correctly level a manual bed, with a sheet of ordinary printer paper. Those heating and cooling cycles will eventually make their presence felt, I think.

A. Russell

Very easy to build, wireing also easy to connect together but to short not long enough to make printer look good when cable tied to frame not done a test print yet, as cannot find software to download to computer, so far deffent recommend to bye You’re only directed by the manual to check bed clearances to the nozzle at each of the 4 corners, but I’d also recommend including a check at the centre of the bed, on your final pass. Mine were already good, out of the box. Check each corner, until you can complete a pass without requiring ANY adjustment of the bed levelling dials.

Andrew

I made 4 or 5 passes of nozzle checks at each of the bed corners, before I made a complete pass without requiring any dial adjustments for the bed height. I have printed several parts over the past couple of weeks and have had no failures at all so far. I have the magnetic/flexible build plate installed with mine.